Washing your hearing aids.

Izvor: KiWi

Inačica od 00:58, 30. svibnja 2013.

Hearing aids which easily fit in the head.

before you go to bed when removing your hearing aid you should watchfully wash down with a dry cloth or tissue. Some time should be also spent by you inspecting the part of the hearing aid that fits to the ear canal because it is likely that a of ear wax may have occurred. will have to eliminate the wax if this is the case then. When you purchased the hearing aids you must get a cleaning tool which can be used to do this which typically takes the proper execution of a pick or a brush or a toothbrush could be also used by you.

Reading aids which fir behind the head. hearing aids

Much like the above mentioned, the procedure is comparable. However, the primary difference being that the ear form which fits into the ear which is generally made of Lucite or plastic which is non-electrical and therefore can be washed in mild soapy water. Before washing it's very important to ensure the earpiece is disconnected from the behind the head section to ensure the electric part of the hearing aid does not get wet. Dry the ear piece correctly before using and also make sure that the tube is clear of water. Take note that the tube may have to be replaced following a time period generally 3 to a few months while the mobility may be lost.

Things not to do

1. As this might cause the materials from which the aid is made to break down wash the hearing aid with solvents or alcohol. Special cleaning fluids can be purchased by you built to clean hearing aids.

2. Dont allow the part of the hearing aid get wet. Prevent wearing the aid when bathing of bathing.

3. Try not to shed the hearing aid, especially on a hard floor as this could cause the hearing aid to break.