The Bunny Hop

Izvor: KiWi

In mountain biking and also BMX riding, the rabbit hop

Is really a bicycle strategy that involved bunny stuffed animals the participant training the

Cycle up and over a barrier while remaining in

Action about the bike. Experienced bikers could lift

their bicycles more than a or one and a-half

Legs. The world record for the bunny hop stands at

4 feet.

The bunny hop is completed by approaching a barrier

with speed, lifting the front of the bicycle then

leveling the pedals. In the event the bike has total or top

suspension, pre-load the shocks by pressing down

on the bike just before you reach the barrier.

When the shocks have been pre-loaded, the driver

Can spring upwards, pulling up with the hands and

feet in the same time. Foot straps or clipless

pedals help with this, while if plain software

pedals are used, it's still possible. Because the rider

lifts, the arms may roll through rotating the

throttle. Drive down, after the object is cleaned

To the bike then absorb the impact with the arms

and the legs.

It is often times a myth a rabbit hop

without toe clips is accomplished by turning forward

On-the bars. Lifting on a mountain bike

while standing next to it's quite difficult to

Retain the handlebars.

The bunny hop is quite favored by mountain biking,

as experienced individuals causes it to be seem a lot easier

than it really is. New mountain bikers should

Before they really test the exercise a lot

Jump, as doing it on a bigger obstacle can easily

be very dangerous.

With proper exercise, the bunny hop may be accomplished,

even for newbies. All you need to-do is give it

Time and effort, and you will be pulling off-the

Rabbit hop just like the pro's do-it.

(word count 304)

PPPPP