Advice for updating my VW head unit9499102
Izvor: KiWi
So you've got your amplifier, sub woofer, speakers and head unit for your Volkswagen. Now what? In The Other-hand, some recommendations may help when approaching the occupation for the.
Whenever working on electrical devices, ensure everything is switched off to stop hurting yourself. Make sure you've correctly disconnected it by analyzing your dash. When the mileage counter is off, then the battery is off.
Cleanly installing a stereo for the vehicle is typically the trickiest & most timeconsuming parts of the setup process as a result of many wires running to the head and amplifier unit. On The Other Point., the is a simple vehicle to run and hide wires through. Before starting, be certain you understand the method to wire your amp, speakers and head unit because that advice can actually save a real pain afterwards.
The baggage compartment is the most logical area to situate the amp. The amp will definitely be screwed by a lot of people towards the back of the rear-seat to save space or simply screw it towards the base of the trunk. Either way works fine.
The whole back seat folds down, developing a simple avenue to run wires through to the very front of the auto. It's also where you'll need to ground your amplifier. Appear underneath the bottom seat cushions in the rear, you'll see the seat-belts are screwed in with a nut. Use a Phillips-head screw driver to engage the grounding cable and unscrew the nut, then twist everything back together.
Open one of the back doors and moreover you'll see a plastic panel to the earth. This is the area at which you'll have to remain on wiring your stereo. The same is true for your front-door. These black-plastic panels could be removed by unscrewing the screws using a Phillips head screw driver. After running the wires beneath these panels, you'll arrive at the front portion of the car and an obvious dead-end. However, also for the trunk, the carpeting may be pulled back to continue hiding the wires. Don't let yourself be concerned about as it's easily reattached if you simply pull out the fringe portions of the carpeting destroying the rug.
From here, you can use all of the required wires up-to the head unit. First, remove the head unit from the dashboard. Some folks will further remove parts of the dash to make space to properly run cables for the very best unit. However, with a trick can be a time saver. Make use of a broken coathanger to run wires up through the wiring channel supporting the head unit. Considerable time may be saved by this.
Find a difference in the auto to operate the electricity cable from your amplifier to the battery.
Detailed info on VW Lautsprecher wechseln can be found on the main website.